Techmation IMM Operation Manual

In this section, we will talk about how to get to plastic charging function settings screen on a injection molding machine. And what are the meanings of Suck back control mode, Charge back pressure valve,Suck back control before charging,Back pressure proportion and Charging control once again. Charge function settings process path: screen –> F4 charge –> F4 function Charge function settings screen of Powerjet plastic injection machine Suck back control mode: When the selection of the suck back time control is selected, the suck back position settings column unit will change to time which means suck back movement timing settings are available. Charge back pressure valve：You can either choose output or not output during the charge back pressure valve. Suck back control before charging：Selection of time and position

How to reach plastic melting temperature settings screen and some explanation/tip on injection molding machine`s temperature setting skills. Path: screen –> F8 temperature –> F2 temperature Maximum plastic melting temperature preset value 450℃。 Keep warm function: Use to select “not use” .When it shows”use”then the actual temperature is set according to the preset warming temperature. Keep warm temperature：When the temperature reached the preset keep warm temperature the computer will automatically switch on the heater to activate the keep warm function. You can choose the heating starting time according to this screen. Anti-cold start time: this time on the actual temperature reached the set temperature of minus deviation of the temperature after the next time. Allow time after the end of the action. Electric heat diagram color explanation: Dark

In this article, we will show you how to get to the ejector settings panel screen. And explains the meanings of the keywords, how the settings will get work. Path: screen –> F5 ejector –> F2 ejector Ejector mode：Ejector mode consists of 3 different kind of options ; Stop：Use this function when ejector stop,uniformly used under semi auto mode, automatic mode is not available,the thimble will push then stop to await for the extraction of the production, the thimble will only move backward after the power door is closed . After the thimble movement then the close mold will activate. Frequency：The ejector frequency is count according to the setup value of the ejector frequency. Vibration：It is the ejector vibration, the thimble will rely on the frequency set and

In this post, we will show you how to find the alarm display records on your plastic injection molding machine? So you can lean how your engineers opearation levels. Path to get to alarm display records screen: F10 next –> F2 monitor –> F2 alarm Display Start No: The screen displays 8 error messages at a time. If you want to refer to the previous recorded errors you can enter here the error number for the first error to be displayed on the screen.But this system is only allow to record 100 errors in maximum and the datas will be save when the electricity is OFF. Total Error Count: The total number of errors is recorded. Reset: Set this value to “1” if you want to reset the

How to get to the screen of core settings? What is the meaning of core in and core out? And what is it`s function and how to control it? Path: screen –> F6 core –> F2 core 1/F3 core 2 F2 core 1 parameters settings F3 core 2 parameters settings Core means core in and core out movement, its also a injection of a core when mold platen needs a mold close procedure, while during the open mold procedure the core was suck out and return to its original form, this function basically is used for a cannular mold platen. Under a auto mode condition injection and core move forward at the same time to prevent the core from being contracted when injection.Therefore core and screw is not

In this section, we will talk about how to get to injection parameters settings screen, how to set the parameters details and adjust it according to the exactly product it`s manufacturing. Injection Parameters Settings Process Path: Screen –> F3 injection –> F5 parameters Injection Parameters Settings Screen of Plastic Injection Molding Machine This screen consists of the corresponsible parameters of injection and hold pressure settings. (please refer to the parameters index for further information)

Show the injection curve settings screen path of Plastic Injection Molding Machines with Techmation controlling computer. And explain the meanings of Pressure curve, Setting speed,Setting pressure,Injection speed and Injection pressure. Injection function settings path: Screen –> F3 injection –> F4 curve Pressure curve: Injection set and a chart of the injection / pressure loop during the implementation of value. In practice, the value of time will be shown. Injection refers to the conditions set value of the curve and the injection / pressure moves during the actual value of the curve ¸ will be displayed in real-time injection curve on the screen. Setting speed: This refers to the Green Line out Radio and the pressure to set the pace. Setting pressure: This refers to the blue line and

Show you the injection function settings path of plastic injection molding machines, Explanations of Injection pressure increase function, Injection fast speed function and Injection shut off. Path: Screen –> F3 injection –> F3 function Injection function settings screen of Plastic Injection Molding Machines Hold pressure and injection function could choose use or not use. Injection pressure increase function： When you are using the accumulator, you could reach a fast speed injection pressure which a high-speed injection speed will be activated. Injection fast speed function: The activation of fast speed injection is selective, choosing another direction valve will reach a high-speed injection speed. Injection shut off： Select when the machine consists of shut-off equipment.

This article will talk about mold open & close setting parameters on injection molding machines with Techmation control panel. It includes how to enter the setup screen and all corresponsible parameters. Path: screen –> F2 mold platen –> F4 parameters F4 parameters settings screen for mold open and close Path: screen –> F2 mold platen –> F5 parameters F5 parameters settings screen for mold open and close The above screen includes open mold setting and all cor-responsible parameters (Please refer to the parameters index for further information) Please feel free to contact us if you still have any problems  with plastic injection molding machine`s mold open and close parameter settings with Techmation controlling system.

In this article, we will show you the Open close mold function setting screen on injection moulding machines with Techmation control panel. And tell you the mold open and close setup process. Of course, a detailed specification of each terminology will be offered to help you understand what it is meaning. Path: Screen –> F2 mold platen –> F3 function Open / close mold function setting screen   Re-cycle timing: Remain time after a cycle is done and between the time entering into another new cycle.   Open mold continuous moving: You can either choose use or not use the ejector or core (A/B/C).   Continuous moving position: The position of the movement starting point.    

In this section, we will talk about injection setting parameters on Plastic injection molding machine with techmation control unit. Show you the injection settings path and explain what is injection pressure and hold pressure.   Injection Settings Path: screen –> F3 injection –> F2 injection   Injection settings` screen of Plastic Injection Molding Machines   Injection and hold pressure: Due to the injection control, it is divided into injection and hold pressure, injection is divided into 4 stages, each stages has its own pressure and speed setup , transition of each stages is used according to the position distance to transit the pressure and speed, it’s is suitable for different kinds of complicated , high precision mold platen , however injection hold pressure is available to transit by

Specifications and process path of mold platen setup for injection molding machines with Techmation injection molding controller. To help you understand the setting principle of iinjection machine`s clamping unit. <strong>Path: </strong>screen –> F2 mold platen –> F2 mold platen <em><p style=”text-align: center;”>F2mold platen setting screen</p></em> <strong>Open mold stroke: </strong>The maximum stroke of the open mold. <strong>Open close mold data settings: </strong>Open and close mold movement are divided into 4 stages. The pressure, speed, could be adjust separately. The pressure and speed is transfer according to the open close mold position. <strong>Mold platen position: </strong>Display mold platen current position.  

Detailed operation menu specifications of Injection Molding Machines. Helping understanding interface of the Techmation controlling panel. Warning: Situation display above, mold platen name, motor movement situation, open mold total amount timing and at the below part had point out the date, time of display key will be shown in any of the screen After switching on the computer on your plastic molding machine, please insert the password and code according to your operation. If there is no competence to correct the data, please press to cancel.  

This post is about the specification of function screen selection on plastic injection moulding machines. Works on brands Powerjet, Yizimi,Haixing, Huayong, Borche, etc. To access any of the screens described in this section please use this graphic as a reference： If you want to know further about the usage of the monitor selection key, (F1~F10), please refer to the screen selection key part in the plastic injection machines operation manual. &nbsp;

In this article, we will show you the pictures and brief specifications for the data entry function on plastic Injection Moulding Machine with Techmation Controllers. The keys described in this section are used for numerical and text input to the data entry function on a plastic injection moulding maker. Important: In order to avoid any loss of data and/or settings make sure you have saved the current mold set again before loading a new mold. If you fail to do so any settings changes you may have made will be lost. When you turn off the controller/machine the current settings will be saved as the working mold set. Nevertheless, you need to save the mold set again before loading any new mold set since any changes you made

In this article, we will show you the manual operating process & specifications on Plastic Injection Moulding Machines Running Techmation Controllers. Below we will try to detailed explain to you the manual operating process & specifications with each button key of Techmation Controllers. Open Mold Key: While in Manual Operation mode, press key to open the mold according to the data set. If core(s) are used they will be interlocked and moved according to the settings, open mold will stop operating once the hand is lift up. Close Mold Key: While in Manual Operation mode, press key to close the mold as preset parameters. If core(s) are used they will be interlocked and moved according to the settings. If robot is required, robot will return to the orginal

In this article, we will show you the pictures and brief function specifications for the mold height adjustment on injection molding machines running Techmation controllers.  It should be works on the machines like Powerjet, Guanxin, Yizumi, Haixing, Golden Eagle, etc. Mold Height Auto Adjustment: This key provides two options of function, the first press is thick mold adjustment, the screen will display a transfer from the manual to thick mold, under this situation, mold distract and forward is able to move, meanwhile to provide convenient and safety to the mold platen.At the same time operating the open close mold, injection, charge, suck back, nozzle in and out pressure and speed eventually use the internal low pressure slow speed, the position of pressure speed will not change while operating,