650 Ton Injection Molding Machine

Injection Unit

Injection Unit_Guanxin 1000 ton Plastic Injection Molding Machine
  • The innovative design of nitride hardened sever screw and barrel, particular screw washer, collar and distributor with new technics, which improve plasticizing and wearing.
  • The injection part USES the casting base and linear guide rail, and the two-cylinder balanced injection device, injection unit incorporates optimizing injection supporting seat, front carriage assembly and rear plate assembly with balanced twin cylinder injection unit for enviously distributed force and rapid screw motion.
  • Nozzle alignment is provided using a simple mechanism with fine adjustment fo accurate centering.
  • Injection stroke controlled by linear transducer, carriage stroke controlled by limit switch, plasticizing speed detection.
  • Cols start prevention, alarm for injection failue Melting cable device.
  • Melting cable devive.
  • Specific screw and barrel designs are available for processing different material requirements.

Clamping Unit

  • Finite element analysis casting ensures mechanical rigidity of the clamping mechanism, single casting of toggle link on the movable platen and stationary platen which enhances rigidity of the clamping unit.
  • Innovative and heavy-duty S points toggle mechanism with same opening stroke, required.
  • less motion time. also gives optimal mould closing and opening speed profile. Under the low pressure and flow the mold. is adjusted placidly and low noisy with the optimizing gear mold mechanism, The lubrication pipeline USES the hard tube layout, the reliability is high, the service life is long.
  • Auto_circle lubrication filtrate system ensures lubrication adequately and save much lube.
  • Ejector and clamping stroke controlled by linear transducer.
  • Fast clamping function, metal strip under the clamping unit, provide protection for wearing.
  • Chrome plated tie bars which made from alloy structural steel are designed manufactured for high rigidity and wear resistance.
Clamping Unit_Guanxin 1000 ton Injection Molding Machine

Full Servo Driver

Servo Motor _1000 ton Injection Molding Machines
  • High efficiency: It’s fast for responses to reduce the processes switch over time as a result of cuttings the producing cycle. For instance. it costs 35ms for flow from rest to full charge and the pressure reaches at the maximum 40ms.
  • Accurate Precision Adopted Closed Loop Control system. Injection Pressure and speed are real time closed loop control (Pressure sensor and rotary transformer). The can catch 3%. In this case, comparing with the coordinative technical of the normal system.it catches 6%.
  • Energy-Saving Cooperating the top professional manufacturer on the globe with our senior Chinese and German designers,the excellent performance is under low pressure and speed (low velocity stability), According to the variety of injection technology(significant on both holding and cooling phases), when comparing with the traditional design injection moulding machine can achieve energy saving 20-80%.
  • Quiet workshop: Introducing overseas original hydraulic pumd and working in the designed hydraulic pumd of specialization widely reduce noise and economize cooling water.
  • The most valuable clauses on guarantee the quality: For client’s benefit,we promise to exchange, return and maintain our servo motor for 2 years.

Hydraulic System

  • New frame design, high rigidity, low vibration and low noise.
  • The gravity hydraulic system adopts the cooperation of world famous brand oil pump and control valve,
    which can precisely control the force, speed and direction of the hydraulic mechanism to ensure the accuracy, reliability and durability of the whole machine.
  • The oil valve plate is distributed in the actuator accessories (by cylinder, oil motor), the reaction speed is fast and the dynamic performance is good.
  • Repair piping layout is more reasonable and beautiful, and maintenance is convenient.
  • Sound main hydraulic components, seals all use world famous brand.
  • Hydraulic system is all connected by straight teeth and sealing ring, good sealing, easy to disassemble.
Hydraulic System of 1000 ton Injection Molding Machines

Parameters Details

SPECIFICATION MODEL A6500GX
INJECTION UNIT
Screw Set / A B C D
Screw diameter mm 80 85 90 100
Screw L/D ratio ?/ 22 20.7 19.6 17.6
Shot volume cm3 2110 2382 2671 3297
Shot weight (@PS) g 1920 2168 2430 3000
oz 67.73 76.47 85.72 105.82
Injection rate g/sec. 442 500 560 691
Injection Pressure Mpa 215 190 169 137
Plasticizing capacity g/sec. 58.7 65.4 71.8 86.5
Screw speed rpm 160
CLAMPING UNIT
Clamping Force KN 6500
Opening stroke mm 930
Max. daylight mm 1860
Movable platen size mm x mm 1340 x 1340
Space between bars mm x mm 930 x 930
Max. mold height mm 930
Min. mold height mm 380
Ejector stroke mm 260
Ejector force KN 180
POWER UNIT
Hydraulic system pressure Mpa 16
Motor power KW 39 + 39
Heater power KW 49
GENERAL
Machine Weight Ton 26
Hopper capacity L 80
Oil tank capacity L 600
Machine Dimensions(L*W*H) M 9.8 x 2.4 x 2.7
* We reserve the right to make changes as a result of further technical advantages.
Specification of 650 ton Injection Molding Machine

Get Price Now

    * We never spams. Your information is SAFE with us.

    650 Ton Injection Molding Machine November 23, 2020