Show you the path how to get to screen of nozzle parameter settings on a injection machine. And This screen consists of all cor-responsible parameters of the nozzle and mold adjustment. Path: screen –> F7 nozzle –> F3 parameters This screen consists of all cor-responsible parameters of the nozzle and mold adjustment. (Please refer to the parameters index for further information) Check below link for more about plastic injection molding machines operation manual: https://guanxin-machinery.com/category/techmation-imm-operation-manual/ Or feel free to contact us for any questions about the nozzle parameter settings on Plastic Injection Molding Machines.
Read more →How to get to injection nozzle settings screen on a injection molding machines` control panel? What is the meaning of nozzle pressure, nozzle speed, nozzle position and how to select the nozzle distraction mode? Path: screen –> F7 nozzle –> F2 nozzle Pressure: Set here the hydraulic pressure for Nozzle advance and retraction. Speed: Set up suitable nozzle high speed and slow speed action, when the nozzle move in a high speed to the final position, nozzle forward will change to a slow speed movement until the slow speed timing is done. Position: Nozzle move forward to the final position will change the speed from high speed to low speed, considering changing to slow speed before 20mm of the final position to allow the shut off to reach
Read more →How to get to the screen of core parameters settings panel? And how to set up the parameters according to your actual production demands. Path: screen –> F6 core –> F5 parameters This screen consists of all cor-responsible parameters of the core settings(please refer to the parameters index for further information). Check below link for more about plastic injection molding machines operation manual: https://guanxin-machinery.com/category/techmation-imm-operation-manual/ Or feel free to contact us for any questions about the Core parameters settings on Plastic Injection Molding Machines.
Read more →How to get to the screen of core function setup panel? And how to set up the parameters according to your actual production demands. Path: screen –> F6 core –> F4 function Value is set according to the actual production demand. Check below link for more about plastic injection molding machines operation manual: https://guanxin-machinery.com/category/techmation-imm-operation-manual/ Or feel free to contact us for any questions about the core function setup on Plastic Injection Molding Machines.
Read more →The injection molding machine is one of the most commonly used equipment in the plastic processing industry, and usually it needs to work for a long time without interruption. So, no matter for the injection molding machine manufacturer or user, how to ensure the stable and continuous production of the injection molding machine is a very worthwhile goal to achieve. From the user’s point of view, selecting the correct injection molding machine model and effectively implementing regular preventive maintenance is the easiest way to ensure that the injection molding machine can continue to work normally without interruption. The so-called preventive maintenance is a series of prevention and inspection, which can find out the potential danger of failure in advance and effectively prolong the working life of the parts.
Read more →A kind tips to guide you to get through to the ejector parameters settings screen. Helping you to set up the ejector parameters as soon as possible. Path: screen –> F5 ejector –> F4 parameters This screen consists of all corresponsible parameters of the ejector settings (Please refer to the parameters index for further informations). (How to set up a injection molding machine`s ejector parameters?) Check below link for more about plastic injection molding machines operation manual: https://guanxin-machinery.com/category/techmation-imm-operation-manual/ Or feel free to contact us for any questions about the ejector parameters settings on Plastic Injection Molding Machines.
Read more →How to get to the ejector function settings screen on the control panel of injection molding machines? What is the functions meaning of robot, Automatic power door and Reject once again? Path: screen –> F5 ejector –> F3 function Robot: In order to operate with the automatic production of the production department, therefore robot is used to replace the workers to extract the injection products. Therefore after every completion of open mold the robot will automatically extract the products. Besides, in order to protect the mold platen and the robot the computer of our company will ensure that the robot has returned to its position in reserve before the close mold then close mold will be activate. Automatic power door: If there is an installment of pneumatic or
Read more →PVC Injection Molding – PVC Plastic Molds & PVC Molded Parts PVC (Polyvinyl Chloride) is one of the most commonly used materials in plastic injection molding, which is third-most widely produced synthetic plastic polymer thermoplastic. Due to the great unique properties (refractory, anti static, easy to be machined) and economical (low cost but high yield), both rigid and flexible PVC plastics are prized by many applications across a wide array of industries from construction, chemical processing, PVC blister packaging, health care equipment and household. Polyvinyl Chloride is a thermoplastic, can be easily injection molded and then subsequently recycled. Economical production cost combined with the above characteristics of the plastic, PVC injection molding has been one of the best and easiest choices for manufacturing a variety of plastic products
Read more →PVC Injection Molding – PVC Plastic Molds & PVC Molded Parts PVC (Polyvinyl Chloride) is one of the most commonly used materials in plastic injection molding, which is third-most widely produced synthetic plastic polymer thermoplastic. Due to the great unique properties (refractory, anti static, easy to be machined) and economical (low cost but high yield), both rigid and flexible PVC plastics are prized by many applications across a wide array of industries from construction, chemical processing, PVC blister packaging, health care equipment and household.
Read more →In this section, we will talk about how to get to charging parameters settings screen. And then you can adjust all the details according to your production line. Charging parameters settings process path: screen –> F4 charging –> F5 parameters Charging parameters settings screen for Powerjet plastic injection molding machine This screen consists of all corresponsible parameters during charging settings. (Please refer to the parameters index for further informations) Feel free to contact us if any problems about plastic charging parameters settings on plastic injection molding machines.
Read more →In this section, we will talk about how to get to plastic charging function settings screen on a injection molding machine. And what are the meanings of Suck back control mode, Charge back pressure valve,Suck back control before charging,Back pressure proportion and Charging control once again. Charge function settings process path: screen –> F4 charge –> F4 function Charge function settings screen of Powerjet plastic injection machine Suck back control mode: When the selection of the suck back time control is selected, the suck back position settings column unit will change to time which means suck back movement timing settings are available. Charge back pressure valve：You can either choose output or not output during the charge back pressure valve. Suck back control before charging：Selection of time and position
Read more →PVC Pipe fitting injection molding process One significant processes utilized to produce plastic pipe fittings is the injection molding. Gear to shape fittings comprises of a form and an injection molding press. The shape is a part metal square (typically steel or hardened steel) that is machined to frame the depressions in the square. Hollows in the form parts are made by apparatuses molding the part hole. The shaped parts are made by filling the cavity in the form through a filling port called entryway. Contingent upon the part to be made, an injection form can be made with various holes and coordinated by a few doors. Likewise, this sort of part is commonly empty. At that point is significant the structure of the centers so as to
Read more →
Here we will show you how to get through of automatic barrel clean-up settings. And the specifications of Auto cleaning,Cleaning frequency and Cleaning time. Automatic barrel clean-up settings Path: screen –> F4 charge –> F3 cleaning > Automatic barrel clean-up settings screen for plastic injection molding machine Auto cleaning: Under the manual mode, if the operator is willing to clean the storage in the barrel, you can use the setup cleaning frequency and the time of each cleaning by pressing the automatic cleaning key to operate (the prerequisite condition is the frequency and timing should not be 0) Cleaning frequency: According to the actual demand to setup the cleaning frequency, the maximum setup is 99 times. Cleaning time: Cleaning timing could be set according to the actual situation.
Read more →What is injection molding? Injection molding is an assembling process generally utilized for manufacturing things from plastic knickknacks and toys to automotive body parts, mobile phone cases, water jugs, and holders. Basically a considerable lot of the plastic parts that we use in consistently life are injection formed. It is a brisk process to make a mass measure of indistinguishable plastic parts. The adaptability fit as a fiddle and size attainable by the utilization of injection molding has reliably broadened the limits of the plan in plastics and permitted considerable options of conventional materials because of structure opportunity and light-weighting. An injection machine is comprised of three essential segments – the feed container, the screw, and the warmed barrel. Plastic granules for the part are encouraged into the
Read more →How to reach plastic melting temperature settings screen and some explanation/tip on injection molding machine`s temperature setting skills. Path: screen –> F8 temperature –> F2 temperature Maximum plastic melting temperature preset value 450℃。 Keep warm function: Use to select “not use” .When it shows”use”then the actual temperature is set according to the preset warming temperature. Keep warm temperature：When the temperature reached the preset keep warm temperature the computer will automatically switch on the heater to activate the keep warm function. You can choose the heating starting time according to this screen. Anti-cold start time: this time on the actual temperature reached the set temperature of minus deviation of the temperature after the next time. Allow time after the end of the action. Electric heat diagram color explanation: Dark
Read more →In this article, we will show you how to get to the ejector settings panel screen. And explains the meanings of the keywords, how the settings will get work. Path: screen –> F5 ejector –> F2 ejector Ejector mode：Ejector mode consists of 3 different kind of options ; Stop：Use this function when ejector stop,uniformly used under semi auto mode, automatic mode is not available,the thimble will push then stop to await for the extraction of the production, the thimble will only move backward after the power door is closed . After the thimble movement then the close mold will activate. Frequency：The ejector frequency is count according to the setup value of the ejector frequency. Vibration：It is the ejector vibration, the thimble will rely on the frequency set and
Read more →In this post, we will show you how to find the alarm display records on your plastic injection molding machine? So you can lean how your engineers opearation levels. Path to get to alarm display records screen: F10 next –> F2 monitor –> F2 alarm Display Start No: The screen displays 8 error messages at a time. If you want to refer to the previous recorded errors you can enter here the error number for the first error to be displayed on the screen.But this system is only allow to record 100 errors in maximum and the datas will be save when the electricity is OFF. Total Error Count: The total number of errors is recorded. Reset: Set this value to “1” if you want to reset the
Read more →Guanxin`s HDPE Bottle Injection Blow Moulding Machine is one of the hot sell plastic injection blow molding machines manufactured from China. This kind of plastic bottle making machine looks like a traditional horizontal injection molding machine but it`s optimized with dozens of parts or even redesign the structure, and electronic and hydraulic systems. Our HDPE Bottle Injection Blow Molding Machine can be used to produce lots of single-layer bottles without handle. The product range covers the different sizes of Milk/food packing bottles, Chewing Gum Bottle, Comestic Bottles, Medical Bottle, Tablet-Bottle, Pesticide Bottles, Roller Ball Bottle, Eyedrops Bottles, jar bottles, and other HDPE molding bottles. How HDPE Bottle Injection Blowing Molding Machine Works Why to Choose Guanxin`s HDPE Bottle Injection Blow Moulding Machines Moulding Machine`s Standard Configurations Our Injection
Read more →
