TECHMATION Controller Operation Manual-Injection molding Machine

This section injection molding machines pperation manual is the operation manual of PXA255 (standard version) system software & hardware made by Techmation. It includes two parts: operation modes and operation menus. It will explain how to setup and preset the clamping unit, injection unit, product inspection, list files and network.

About the HMI panel, including every key function and HMI display, please refer to the part of operation menus.

Warning: Considering the operation safety and normal operation, please refer to thr operating modes of the machine as required by the manufacturer of the machine in order to prevent injuries from the machine and damages to the machine.Damages will be induced without enough caution and professional understanding towards the setup of the machine.

Responsibility: Techmation bear no responsibility for any safety of all systems of the injection molding machine. Regarding to the guarantee of the safety of the machine’s operation is the responsibility of our company. Any person who wants to operate the injection molding machine must be professional or well trained. Any operator must read this manual and the manual of the injection molding machine before operate the machine.

Please note: Any information in this manual is not allowed to be modified without any notice.

If you need any further informations, spare parts, services, or any latest information related to the computer etc, please contact us by the following address:

Guanxin Plastic Machinery Co.,Ltd
Address: Room 401, Longxin Mansion，
Liwan District, Guangzhou, Guangdong, P.R.China
Phone: +86-020-8163 3395
Fax: +86-020-8163 3398
E-mail: [info ]@guanxin-machinery.com

We sincerely hope that this manual will be a good helper due to the operation for our machine. Meanwhile, in order to improve our product, we kindly hope to receive your feedback.

In order to protect our intellectual property rights, all information included in this manual is not allowed to reprint without approval. Such prohibit includes the unidentified third party without the consent of the use and purpose. This operation manual is for internal use only.

SPECIAL PROMOTION

GUANXIN 1600-DGII 160 Ton Injection Molding Machine Price _China Plastic Machinery Manufacturer

210 Ton Injection Molding Machine Price from China Plastic machinery manufacturer

Precursory information and rules when injection molding machines errors occurred

By Martin_Chen on April 28, 2022 / Injection Molding Machines' knowledge

The study of injection molding functions or states gradually declines with the expansion of the use time. There are some precursory information will be shown when injection molding machines errors occurred. These precursory information is also called potential fault, which identifies physical parameters indicating that a functional failure is about to occur, functional faults indicate that the injection molding machine has lost the predetermined performance standards. The change of the injection molding machine errors rate with time is often called the tub curve. The failure rate of the injection molding machine is roughly divided into three phases: early fault, occasional fault period and lossy fault period. 1. Early fault period The injection molding machine is in an early failure period, and the failure rate is high, but the

2.1.6 Specification of screen selection on Injection Molding Machines with Techmation Controllers

By Martin_Chen on April 25, 2022 / Techmation IMM Operation Manual

This post is about the specification of function screen selection on plastic injection moulding machines. Works on brands Powerjet, Yizimi,Haixing, Huayong, Borche, etc. To access any of the screens described in this section please use this graphic as a reference： If you want to know further about the usage of the monitor selection key, (F1~F10), please refer to the screen selection key part in the plastic injection machines operation manual.  

Things to know about multi material injection molding

By Martin_Chen on April 21, 2022 / Injection Molding Technology

multi-material injection molding technology includes two-shot injection molding, like co-injection, double injection molding and sandwich injection molding, etc. The basic idea of multi-material injection molding is to combine 2 or more materials with different properties to increase product value. The first implant material is called the substrate or base material, and the second implant material is called the over molding material. 1. Various two-shot injection molding technologies During the overmolding process, the cover material is injected over, under, around, or into the substrate to form a complete part. This process can be done by multiple injection molding or insert injection molding. A commonly used covering material is elastic resin. Multi-injection: Multi-injection is a good method of medical device processing if the construction of the covering material allows it.

2.1.5 Data Entry Function On Injection Molding Machine with Techmation Controllers

By Martin_Chen on April 18, 2022 / Techmation IMM Operation Manual

In this article, we will show you the pictures and brief specifications for the data entry function on plastic Injection Moulding Machine with Techmation Controllers. The keys described in this section are used for numerical and text input to the data entry function on a plastic injection moulding maker. Important: In order to avoid any loss of data and/or settings make sure you have saved the current mold set again before loading a new mold. If you fail to do so any settings changes you may have made will be lost. When you turn off the controller/machine the current settings will be saved as the working mold set. Nevertheless, you need to save the mold set again before loading any new mold set since any changes you made

Important knowledge of injection molding machine barrel

By Martin_Chen on April 17, 2022 / Injection Molding Machines' knowledge

The injection molding machine barrel and screw make up the extrusion system. Like the screw, the barrel also works under high pressure, high temperature, severe wear and certain corrosion conditions. During the extrusion process, the barrel also has the function of transferring heat to the material or transferring heat away from the material. A heating and cooling system is also installed on the barrel, and the machine head is installed. In addition, the feeding port should be opened on the barrel. The geometry of the feeding port and the selection of its position have a great influence on the feeding performance. The smoothness of the inner surface of the barrel, the grooves on the inner wall of the feeding section, etc., have a great impact on the extrusion

Ballpoint Pen Manufacturing: Things you may need to know about pens manufacturing industry

By Martin_Chen on April 14, 2022 / How & What`s, Project Case

Ballpoint Pen Manufacturing will involve many making processes and pen making machines, like ballpoint pen assembly process, ballpoint pens part manufacturing process, ballpoint pen automatic assembly machines, pens parts making machine, pens materials treatment process & machines, etc. Below we will try to introduce the pen manufacturing industry step by step. Firstly, we should know the pen components & ballpoint pen parts’ names. Most of ballpoint pens will mostly have parts like pen barrel, pen clip, pen tip, thrust device, thrust tube, spring, reservoir, socket, ball & ink. But there are lots of simple design ballpoint pens with quite fewer parts, these ball point pen parts names are pen barrel, pen end clip, reservoir, socket, ball & ink. Secondly, we would like to talk about the

Plastic Helmet Manufacturing Machine: Know the Story Behind Making a Helmet

By Martin_Chen on April 11, 2022 / Project Case

The following articles will cover plastics helmets manufacturing production, various materials used to build motorcycle helmets and they all have different advantages. Helmets have several layers. The outer shell features a reinforced Styrofoam lined interior and a breathable padding that offers the perfect fit and moisture absorption. Because inner padding or foam layering tend to be more uniform across the helmet spectrum, these articles will focus on the commonly used materials for the exterior shell. The helmet is usually composed of a hard shell, a buffer layer, a comfortable cushion, a wearing device, and goggles, etc. The hard shell is mainly made of resin materials of PC, ABS, PC+ABS alloy materials, glass Fiber, and carbon fiber materials, etc. What are safety helmet production process Plastics helmets manufacturing will

2.1.4 Manual operating process & specifications on Injection Molding Machines Running Techmation Controllers

By Martin_Chen on April 11, 2022 / Techmation IMM Operation Manual

In this article, we will show you the manual operating process & specifications on Plastic Injection Moulding Machines Running Techmation Controllers. Below we will try to detailed explain to you the manual operating process & specifications with each button key of Techmation Controllers. Open Mold Key: While in Manual Operation mode, press key to open the mold according to the data set. If core(s) are used they will be interlocked and moved according to the settings, open mold will stop operating once the hand is lift up. Close Mold Key: While in Manual Operation mode, press key to close the mold as preset parameters. If core(s) are used they will be interlocked and moved according to the settings. If robot is required, robot will return to the orginal

2.1.3 Mold Height Adjustment on Injection Molding Machine

By Martin_Chen on April 4, 2022 / Techmation IMM Operation Manual

In this article, we will show you the pictures and brief function specifications for the mold height adjustment on injection molding machines running Techmation controllers. It should be works on the machines like Powerjet, Guanxin, Yizumi, Haixing, Golden Eagle, etc. Mold Height Auto Adjustment: This key provides two options of function, the first press is thick mold adjustment, the screen will display a transfer from the manual to thick mold, under this situation, mold distract and forward is able to move, meanwhile to provide convenient and safety to the mold platen.At the same time operating the open close mold, injection, charge, suck back, nozzle in and out pressure and speed eventually use the internal low pressure slow speed, the position of pressure speed will not change while operating,

2.1.2 Operation Mode Keys of Injection Molding Machine Running Techmation Controller

By Martin_Chen on March 28, 2022 / Techmation IMM Operation Manual

In this article, we will show you the pictures and brief function specifications for the operation mode keys of injection molding machines Running Techmation Controller like Guanxin, Powerjet, Haixing, Yizumi, etc. And kind warnings tip in the daily operation. Manual Key: This key has several functions. It can used to change from Auto Mode into Manual mode as well as a reset key for that and alarm settings. Semi-Auto Key: Press this key to run the machine in Semi-auto mode. At the end of each cycle, the operator shall open and then close the safety door to activate the next cycle running. Sensor Auto Key: Press this key to run the machine in Auto Operation mode with the Photo Sensor activated. At the end of each cycle, the

2.1.1 Control Panel and Keys of Techmation Controller on Guanxin Injection Molding Machines

By Martin_Chen on March 21, 2022 / Techmation IMM Operation Manual

The Control Panel and Keys of Techmation Controller is covered with a protective Mylar layer to make the panel water, dirt and abrasion resistant. All keys are operated through type A mechanical contact switches to provide for reliability and a long service life.On each key, it is printed with key name and its corresponding draft. At the read side of panel, there is a electronic board which has Type A mechanical contact switches to provide for reliability and a long server life for several million switches. If you have any trouble with the switches, you can use the backup switches instead of the damaged switch. The injection moulding machine control panel keys allow you to switch between different machine operating modes and to manually control the operation of

1.4 Robot functions and settings of Injection Molding Machines

By Martin_Chen on March 14, 2022 / Techmation IMM Operation Manual

Robot functions and settings of Guanxin Injection Molding Machines running Techmation controller. This section will introduce the processes and how to set the auto robot on the machine. Press the Manual key to activate the Manual mode . Switch the HMI display to the Others setting screen by pressing F5 ejector then F3 function which is used according to the equipment of the machine.(If there is no robot equipment then this function screen will not exists) Auto Power Door mode: Press drop-down button to enter the selection mode. After charging, the power door will open automatically. But before next cycle, you have to press the button to close the door to activate the next cycle. If this function is disabled, the safety door will not close or open automatically,

1.3 Production Monitor Setup Instruction of Techmation Controller on Injection Molding Machine

By Martin_Chen on March 7, 2022 / Techmation IMM Operation Manual

A article about production monitor setup instruction of Techmation Controller on Guanxin injection molding machines. Includes the processes and specifications you may meet in daily operations. Press Manual key to enter into Manual mode . This control allows you to set the down limit and uplimit values for each production parameters. Once the current production parameter value is out of the presetting value, the controller will give an alarm and stop the machine. The controller will record the time of the tupe of error that caused the alarm. To access the Alarm/Error Message display screen, please press F10 .Press again F2 production monitoring to enter the alarm display screen. In order to enter the automatic alarm screen,

Injection Mold Classification and Types of Injection Molding Molds

By Martin_Chen on March 5, 2022 / Injection Molding Technology

Injection Molds Classification or types of mold injection very depend on what we need to make the plastic parts, because every parts have specific and unique design. when design molds we must see what the influencing factor like geometry, number of cavities, ejection principle, plastic material and shape of parts. Below we will explain the mold classification with few most seen types of injection molding molds. The basic classification of mold based on construction shown on picture below 1. Standard Injection Molds The standard plastic injection mold is the most simple design, basically the standard molds is same as two plate molds construction, they divided in two side : cavity side and core side, cavity side is the side that construct to flowing plastic material from nozzle to

Plastic Injection Mold Base Functions and Structure

By Martin_Chen on March 3, 2022 / How & What`s

A plastic mold plate is any plate required to build a complete plastic mold, and all injection mold plates used for molds have the main requirements, they are : 1. Good corrosion resistant 2. Good Machinability. 3. Easy to clean 3. Good heat transfer. 4. Homogeneity of steel. 5. Easy ability. 6. Low Cost. at the picture below you can see 3 plate mold base type with closed position, basically, 3 plate type injection mold and 2 plate injection mold have some main plate structure, see explanation about plastic injection mold construction type to understand more, explanation plastic injection mold parts and function below based on the number at those 3 plate mould pictures: 1. Fixed Clamping Plate or Top Plate The fixed clamping plate or the top

Plastic Recycling Symbols Meanings on Plastic Products

By Martin_Chen on February 28, 2022 / Blog

Most people may be curious about the plastic recycling symbols meanings on plastic products like plastic bags, food containers, water bottles, and lots of other plastic parts we can see in our daily life. Now here we will try to explain you what are the meanings of the recycling symbols on them. The plastic recycling symbols were formulated in 1988 by the Society of the Plastics Industry (now renamed Plastics Industry Association). This set of logos stamps plastic material identification codes on containers or packaging materials, plastic recycling numbers 1 to 7, so that people can simply join the ranks of recycling without having much work to learn the similarities and differences of various plastic materials. Every plastic container has a plastic recycling symbol, usually at the bottom

Plastic Mold Runner System and Plastic Sprue in Injection Molding

By Martin_Chen on February 26, 2022 / Injection Molding Technology

After plastic material injected by nozzle, runner systems will convey the molten material from the plastic sprue gate. basic runner system consist of sprue, main runner, sub runner, cold slug, and gate. since the design of the runner system has large effect on molding quality, molding efficiency, cycle time, cooling time and other factor, it is important key when design of mold. Runner System Construction in injection mold Plastic Sprue sprue will contact first time with melt plastic, at the injection process, sprue always contact with nozzle from plastic injection molding machine, so consider when design the sprue consider the ball radius of nozzle, make sure it isn’t make undercut on sprue.The dimensions of the sprue depend primarily on the dimensions of the molded part in particular the

2.5.1 Plastic Charging and Suck-back Settings of Plastic Injection Machines

By Martin_Chen on February 25, 2022 / Techmation IMM Operation Manual

In this section, we will talk about how to get to plastic charging and suck-back settings screen. And how to right setting of Charge setting, Suck back setting, Suck back distance before reserve, Charging once again,Cooling before Reserve and Cooling timing,etc. Charge and Suck-back Settings Path: screen –> F4 charge –> F2 charge Charge and Suck-back Settings of Plastic Injection Machines Charge setting: Charging process, a total of 3 stages of pressure, speed control, are free to set its start, the necessary pressure and the speed and location at the last and middle paragraph. Suck back setting: Suck back setting of pressure speed is devided into position or time. If position is selected you only need to insert the suck back distance, if you are not using the