How to reach plastic melting temperature settings screen and some explanation/tip on injection molding machine`s temperature setting skills.
Path: screen –> F8 temperature –> F2 temperature
Maximum plastic melting temperature preset value 450℃。
Keep warm function: Use to select “not use” .When it shows”use”then the actual temperature is set according to the preset warming temperature.
Keep warm temperature：When the temperature reached the preset keep warm temperature the computer will automatically switch on the heater to activate the keep warm function.
You can choose the heating starting time according to this screen.
Anti-cold start time: this time on the actual temperature reached the set temperature of minus deviation of the temperature after the next time. Allow time after the end of the action.
Electric heat diagram color explanation:
Dark Green: Means the actual temperature is within the limit range.(injection movement is available)
Yellow: Heating condition.(injection is not available)
Red: Means the actual temperature has overtake the temperature range which is exceeding the upper limit.
※ Note: If the actual temperature than the original set of temperature alarm, the lower limit will be ‘temperature deviations’ message, but so will be able to reduce the heating next time.
When the temperature is damage the screen will display ”977” , ”988” , ”999”。
977 means the temperature board is not connected or damaged
988 means the temperature wire or temperature induction is damaged.
999 means the temperature is exceeding the normal range limit or the temperature wire is damaged.
Check below link for more about plastic injection molding machines operation manual:
https://guanxin-machinery.com/category/techmation-imm-operation-manual/
Or feel free to contact us for any questions about the plastic melting temperature settings on Plastic Injection Molding Machines.
SPECIAL PROMOTION
