How to get to the screen of core settings? What is the meaning of core in and core out? And what is it`s function and how to control it?
Path: screen –> F6 core –> F2 core 1/F3 core 2
F2 core 1 parameters settings
F3 core 2 parameters settings
Core means core in and core out movement, its also a injection of a core when mold platen needs a mold close procedure, while during the open mold procedure the core was suck out and return to its original form, this function basically is used for a cannular mold platen. Under a auto mode condition injection and core move forward at the same time to prevent the core from being contracted when injection.Therefore core and screw is not allow to use for the same function.
Function：Selecting core mode, it is a core in movement, selecting screw mode it means the products need manufacture with grains, with the help of oil pressure motor to activate turning and position fixing control. (When you are using the function above, please check the motor if there is a oil passage switch, it is because this function is a non standardize equipment)
Core setting: The computer can provide at least 6 group of core control which is depends on the motor oil passage equipment¸every group of core can set separately according to your require including the pressure, speed, movement time, movement position setup.
Control：If a core mode is selected, you can either choose the distance control or the time control. If a screw mode is selected, you can either choose counting control or time control.
Check below link for more about plastic injection molding machines operation manual:
https://guanxin-machinery.com/category/techmation-imm-operation-manual/
Or feel free to contact us for any questions about the core settings on Plastic Injection Molding Machines.
SPECIAL PROMOTION
