1.Check how the machinery works Before starting, the injection molding machine and auxiliary machine must be inspected to ensure that the equipment is in normal condition (according to the requirements of L1 equipment operation records). If any problems are found, the maintenance personnel should be notified in time. 2.Power supply for injection molding machine Turn on the power supply of the injection molding machine, the mold temperature of the mechanical and electrical source, the general mold temperature is set to 80℃, the drying mechanical and electrical source (raw materials need to be dried at 80℃ for 4 hours), the cold water mechanical and electrical source, the exhaust fan and other power supply, turn on the injection molding machine oil pump motor screw and begin to heat up. 3.Grease
Read more →Injection molding machine is a special equipment which combines the hot working characteristics of plastics with the principle of melting die casting of metals. The original plunger injection molding machine was not developed until the late 1940s until the preplasticized screw injection molding machine. Since then, the focus of development is mainly around the pre-plasticized screw injection molding machine, has since appeared twin screw, exhaust and other advanced forms. In 1980, France produced the world’s largest screw injection molding machine, with an injection capacity of 170kg. From the 1980s to recent years, the development of injection molding machine is mainly concentrated in several aspects: namely, the application of precision automatic control system and various auxiliary equipment in automatic molding; Precision machinery and high performance hydraulic system; Various special
Read more →Guanxin`s HDPE Bottle Injection Blow Moulding Machine is one of the hot sell plastic injection blow molding machines manufactured from China. This kind of plastic bottle making machine looks like a traditional horizontal injection molding machine but it`s optimized with dozens of parts or even redesign the structure, and electronic and hydraulic systems. Our HDPE Bottle Injection Blow Molding Machine can be used to produce lots of single-layer bottles without handle. The product range covers the different sizes of Milk/food packing bottles, Chewing Gum Bottle, Comestic Bottles, Medical Bottle, Tablet-Bottle, Pesticide Bottles, Roller Ball Bottle, Eyedrops Bottles, jar bottles, and other HDPE molding bottles. How HDPE Bottle Injection Blowing Molding Machine Works Why to Choose Guanxin`s HDPE Bottle Injection Blow Moulding Machines Moulding Machine`s Standard Configurations Our Injection
Read more →
